Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-20-2024, 08:20 PM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,534
Quote:
Originally Posted by Penthode View Post
Yes that is correct on both counts. we want to verify the thing is working.

The blanking and sweep inhibit are to display the markers on the scope. Instead of creating a beat blip marker where you combine the marker generator with the sweep signal at the input or output, this system introduces a marker by momentarily halting the sweep at the frequency point to make it appear brighter.

For the RF detector, I used a simple diode capacitor resistor network like the one attached. The diode i used was the ubiquitous 1N4148. It essentially rectifies and filters to remove the RF carrier and rf envelope to register on the scope. Try bypassing it and providing the y input of the scope has sufficient bandwidth (eg a 100MHz scope) bypassing it you will see the rf carrier sweep.
I'll make the detector. Thank you for the design! There may be issues with the 8601. I don't think I'm getting RF output. Output level doesn't change. I'll need to break into it and see what's going on!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:53 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.