![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
The HP8600a/HP8601a combo sits in between a more modern and expensive Network Analyser and the older sweep gen/ marker solution but is much more efficient. It's versatility is you can use it as an accurate signal source which can be AM and FM modulated. And than be quickly switched to sweep mode with up to five markers with the flip of a few switches. I shall purchase a Tiny SA as I would like to explore it. |
|
#2
|
||||
|
||||
|
Quote:
Personally, I use the newer HP 8662A which does everything you describe in one device. |
|
#3
|
||||
|
||||
|
Quote:
I personally would prefer a newer network analyser with tracking generator, but the cost would overwhelm me on my limited budget. |
|
#4
|
|||
|
|||
|
Quote:
|
|
#5
|
||||
|
||||
|
Quote:
The left side of the control panel is for sweep setting. ![]() I also have a newer 8664A which has similar sweep capabilities but even more features. Both are briliant pieces of engineering and outstanding performance. Here are the sweep specs from the manual
Last edited by bandersen; 08-14-2024 at 09:25 AM. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Another devotee of the 8662A here. If you can get your hands on one at a reasonable price, you likely will never need another general purpose signal generator. When I got mine, I was able to sell off 4-5 other RF and sweep/marker generators I had accumulated over the years to pay for the purchase!
The only feature that I wish it had was wider bandwidth on the external AM modulation input, so I could feed video into it for signal injection troubleshooting, but the TV service market was DEFINITELY not what these units were designed and priced for originally... |
|
#7
|
|||
|
|||
|
Quote:
![]() ![]() ![]() ![]()
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|