Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-06-2024, 09:11 AM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,534
Couple more questions

I'd like some advice regarding removal of the TV/Phono switch from the circuit. It's not exactly part of the title of this thread but I don't want to start another thread on the same TV...if I understand SOP here. If I should move this to the start of a separate thread, then please let me know.

Yesterday, the Riders service manual I purchased, Volume 4, arrived at my house. In it is the wiring diagram and schematic for the 9TC-240 with the KCS28B1 chassis. The switch on the wiring diagram and schematic is pictured below.





So if I understand what has been described earlier in the thread, if the switch is moved to the phono position, the TV brightness control ground is interrupted and the screen goes dark. There's still HV however. The sound circuit then comes out of pin 5 of the 6AL5 discriminator as coaxial to the switch where it picks up audio input from the RCA jack and is brought back into the sound circuit as a grounded coax line. Around there I get lost! To me it seems the signal goes to terminal 3 of the volume control and out of terminal 2 as coax to pin 1 of the 6AV6 bias clamp???

Below is the WD at the volume control.



The yellow and green coax are from the switch.

I need to understand how this all works with the goal being removal of all the switch wiring and circuitry interruptions. I'd like to just cut it all out and wire the sound like any TV would be without this feature.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.