Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 07-01-2024, 01:09 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
If the frequency is off you diagnose the sweep stage, if frequency is OK and you can get a single image that floats in both axes and can be made to roll both directions with hold adjustment you diagnose the sync.

Most sets horizontal is fairly easy to get on frequency by centering the hold pot and adjusting the synchroguide coils for correct frequency (for sync or single floating image if no sync from separator).

Also if you are using HDMI to AV converter that supports both NTSC and PAL or component video that supports progressive scan and resolutions about SD make sure your sources are configured for SD NTSC interlaced.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:25 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.