![]() |
|
#31
|
||||
|
||||
|
Quote:
That is out of tolerance for 10% and you may have others, some say that having it go higher than 20% is OK, but in my case, I checked each and EVERY resistor, using this site, https://www.allaboutcircuits.com/too...de-calculator/ If it tested within 10% or better, I marked it with green paint, if it checked below, I replaced with a new 1% resistor, This could be your problem, not sure, but It is what I had to go through
__________________
=^-^= Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte. いとおしい人のために |
| Thread Tools | |
| Display Modes | |
|
|