Quote:
Originally Posted by timmy
that’s what thought all pnp transistors seem to do this but I found out why they didn’t work because they had to be turned around the originals were from the uk so of course nothing will work so I’m turning them around tomorrow and hope for the best.
|
Yes you do have to watch the basing especially on subs. Exceptions to test
are big power transistors like HOT's & audio amp outputs. They almost always dead short. Modern HOT's usually have a diode & resistor built in. That
makes the readings screwy. Not to worry, they dead short anyways.
Older germanium transistors can show odd numbers & the B-E & B-C
will show @ .2 on meter.