Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2024, 06:42 PM
matthewray2b matthewray2b is offline
VideoKarma Member
 
Join Date: Apr 2024
Posts: 21
Quote:
Originally Posted by Alex KL-1 View Post
I have one TV-700U working.

Besides that tv-nut said, I can add in practice, fortunately this set are not overly fussy about the V and H user controls (in the side), but anyway, for game console having a little different freq. for H, V or both, a simple readjustment makes the day.

But, maybe it have some sound or video IF misaligment; perhaps marginal to other sources, but maybe being far off for the Magnavbox. If is impossible to find a usable point using the fine tuning, perhaps this are ocurring.

BTW: my set needed a "full cap service", ie, all electros are bad. This can even influence the sync separator, since electro are involved for biasing and coupling. This makes the set fussy about the sync.

In my to-do list is some realigment for my TV-700U; the sound is a little off.
How could you tell it needed new caps? Were they just visibly bad?
Reply With Quote
  #2  
Old 05-06-2024, 08:25 AM
Alex KL-1 Alex KL-1 is offline
VideoKarma Member
 
Join Date: Jan 2021
Location: Brazil (Paranį)
Posts: 515
Quote:
Originally Posted by matthewray2b View Post
How could you tell it needed new caps? Were they just visibly bad?
Due to age, some capacitors simply leaks, or lose value. Is common with electrolytics. Since this small TV uses a lot for inumerous functions, various curious symptons can occur.
Even with some "half bad" caps, the TV can be adjusted to almost normal operation, but some controls become very picky.
I have one TV-700U working and one spare (with dead CRT). One had ALL electros >5µF bad, and other had 1/3 bad. Statiscally, I bet that at least some can have problems.

If are some bad caps at same time with some RF/IF misaligment, the TV will be very difficult to use.
__________________
So many projects, so little time...
Reply With Quote
  #3  
Old 05-06-2024, 11:31 AM
matthewray2b matthewray2b is offline
VideoKarma Member
 
Join Date: Apr 2024
Posts: 21
Quote:
Originally Posted by Alex KL-1 View Post
Due to age, some capacitors simply leaks, or lose value. Is common with electrolytics. Since this small TV uses a lot for inumerous functions, various curious symptons can occur.
Even with some "half bad" caps, the TV can be adjusted to almost normal operation, but some controls become very picky.
I have one TV-700U working and one spare (with dead CRT). One had ALL electros >5µF bad, and other had 1/3 bad. Statiscally, I bet that at least some can have problems.

If are some bad caps at same time with some RF/IF misaligment, the TV will be very difficult to use.

Are you aware of a full cap kit anywhere or should I just go through and find each one? I wasn't able to find a service manual for it online, or much info about it to begin with.
Reply With Quote
  #4  
Old 05-06-2024, 12:06 PM
Alex KL-1 Alex KL-1 is offline
VideoKarma Member
 
Join Date: Jan 2021
Location: Brazil (Paranį)
Posts: 515
Quote:
Originally Posted by matthewray2b View Post
Are you aware of a full cap kit anywhere or should I just go through and find each one? I wasn't able to find a service manual for it online, or much info about it to begin with.
A kit I believe it don't exists...

I have the SAMS of this model. If you not able to find the schematic, I can take photos of it.
__________________
So many projects, so little time...
Reply With Quote
  #5  
Old 05-06-2024, 01:21 PM
matthewray2b matthewray2b is offline
VideoKarma Member
 
Join Date: Apr 2024
Posts: 21
Sounds good. I should probably be able to find everything I need inside. What is SAMS?
Reply With Quote
Audiokarma
  #6  
Old 05-06-2024, 02:25 PM
Alex KL-1 Alex KL-1 is offline
VideoKarma Member
 
Join Date: Jan 2021
Location: Brazil (Paranį)
Posts: 515
Quote:
Originally Posted by matthewray2b View Post
Sounds good. I should probably be able to find everything I need inside. What is SAMS?
SAMS, people from USA can explain in detail, but for short, was a North American service specialized in making own drawing schematics (generally clearer than from some brands), and, amongst other things, making a local replacement/equivalent list.

In other words. I have it's schematics and parts list.
__________________
So many projects, so little time...
Reply With Quote
  #7  
Old 05-10-2024, 03:02 PM
matthewray2b matthewray2b is offline
VideoKarma Member
 
Join Date: Apr 2024
Posts: 21
Quote:
Originally Posted by Alex KL-1 View Post
SAMS, people from USA can explain in detail, but for short, was a North American service specialized in making own drawing schematics (generally clearer than from some brands), and, amongst other things, making a local replacement/equivalent list.

In other words. I have it's schematics and parts list.
Any chance you could send them over?

Also man, taking apart this thing is a nightmare, there's so many wires everywhere. You guys make this stuff sound easy!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:40 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.