Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 05-03-2024, 04:24 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
MUSTS HAVES !
Power supply must be 130 VDC under both zero beam current or max
( full normal brite ) beam current. & varying line voltage. If not suspect
Q801.

Too bright. REPLACE C559 no matter what, its very common on ALL
brands of TV's, Its in the top ten TV problems. Lots of different symptoms too !

G2 must be about @ 300 VDC too high = too bright.

CRT cathodes need to be @100 VDC. Too low too bright & visa versa.

Blows HOT. Be sure its running cool. If not it WILL give up soon.

NOTES : The FBT's in this era of Pannys / Quasars were trouble. Usually
windings shorted & it cooked, crackled, smoked then blew the HOT.
It ended the TV often. On yours it MAY be it has a bad triple / divider
section.
Last keep in mind to do things right you need: a variac / isolation transformer(S). quality meter & good 100 + Mhz scope with 1 KV probes. Anything less is pushing it. Just think of the $ in blown parts you will save
if you do more sets.

73 Zeno
LFOD !
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:22 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.