![]() |
|
#2
|
||||
|
||||
|
First with the 5U4 out there is no voltage to the filter caps. Do the
dim bulb again with it in. If it is a series string pull any tube out & run that test. If a // string pull the hoz output tube. If things look good put the tube back in & see if you get a raster in < 1 mn. If not the trouble shooting starts ! IIRC this is a "doughnut" chassis. They are a bitch to work on so take it very slow ! The idea is get the power supply up then the HV for a raster. At that point you can judge how far to go. The filter caps will probably work but need changing eventually, For now dont spend the $$. 73 Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|