![]() |
|
|
|
#1
|
||||
|
||||
|
B+ is from the 25Z6, and B- is from the 35W4...Don’t you have a schematic?
What do they measure now? jr |
|
#2
|
||||
|
||||
|
Yes I know where to get the b+ but I thought you meant the b+ to the vertical circuit I’ll check the voltage at the rec tubes I do know it’s close to what it should be. And yes I have a schematic. How would I be able to up the b+ ?
|
|
#3
|
|||
|
|||
|
If you could post the schematic(s) of the power supply and deflection circuits, the collective wisdom available here should probably be able to walk you thru it.
|
|
#4
|
||||
|
||||
|
I have been working with the schematic from early television. I don’t remember what the b+ should be 125v or 150v
Last edited by timmy; 02-03-2024 at 04:46 PM. |
|
#5
|
||||
|
||||
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
|
|
#7
|
||||
|
||||
|
On the Riders schematic, it is easier to follow the B+/B- paths from the rectifier tubes to the vertical and horizontal circuits.
http://www.earlytelevision.org/pdf/p..._rider_tv2.pdf jr |
![]() |
| Thread Tools | |
| Display Modes | |
|
|