![]() |
|
|
|
#1
|
|||
|
|||
|
Nice. Congrats.
Quote:
I used an atx power supply for repair/testing. Quote:
![]() Got 6 diversity units and 8 or 9 of the displays, most xav-u50's. Every one required recaps. pins 1-4 are 12v+ 14-17 gnd on display board. There should be 2 void Vias masked as GND and ACC between the fuse and the connector joints. Can solder in wires to provide the power through those just to the display. |
|
#2
|
|||
|
|||
|
Thanks so much! I don't have the link unfortunately I recall it sold pretty fast.
I just opened up the one I have and unfortunately it looks like something blew up inside, everything on the right side (around the flyback) is covered in black soot. It smells like nothing. I haven't dug in to inspect yet but I'm already assuming this is gonna have to be a parts unit. When I received it it was filthy, lots of black dirt coming off the outside when I cleaned it. I guess its also possible dust would be attracted to the high voltage components but IDK. I'll keep my eye out for another I guess. My diversity unit seems just fine, no leaky caps either. https://drive.google.com/file/d/1tHt...fCYj35mDr/view |
![]() |
| Thread Tools | |
| Display Modes | |
|
|