Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 12-13-2023, 12:38 PM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by ARC Tech-109 View Post
I have to disagree with the part about tubes & PC boards.
We were RCA dealers during those years, and RCA to their credit made a very sturdy PC with excellent foil adhesion. The boards and foils handled the heat from the tubes just fine.

But the problem with those TVs was that the solder would crystallize over time, so bad tube socket connections became a thing as these racked up the thousands of hours on them. Reflowing the solder on the tube socket/PC was difficult. Most times, replacing the sockets was the best option.

I bought my first Dremel (which I still own) just for RCAs in order to pull an offending socket and grind down the oxidized pins, then resolder them back into the board which worked well.

This certainly didn't affect every RCA with tubes and boards, and I assume they were higher hour examples or those that didn't get a lot of ventilation.

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.