Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-12-2023, 06:53 PM
ARC Tech-109 ARC Tech-109 is offline
Retired Batwings Tech
 
Join Date: Jun 2020
Location: Planet Earth
Posts: 612
Quote:
Originally Posted by zeno View Post
I dont know why. Zenith & RCA had between 40% & 50% market share
in both B&W & color for yrs. Zenith always sold a few more & stayed
on top. So you should see apx the same. And 50-60% of ALL others.
As far as hand wiring goes you should never mix PCB's with tubes.
Look at the hook up wire. Most is braided & tinned with rubber
insulation then covered with cloth. The cloth had tasteful colors & tracers
in lots of shades & were color coded to the set. Example white / blue
is AFT. Yellow is video, etc. They must of spent millions over the yrs
on that wire. Premium parts were common such as the use of Bel fuses
& Sprague caps.

Enuf fer now
73 Zeno
LFOD !
I have to disagree with the part about tubes & PC boards. My Mag T940 Astro combo from early 1970 is a PC board based tube chassis and despite the use (and abuse) of us growing up it has never had a heat related PC board issue be it bad solder or tube sockets going weak. The only real service has been the numerous 6GH8's and 6JE6's replacements along with a sagging heater in the 3A3 that was caught in time. The set survives to this day with plenty of life in the old jug.
There were plenty of bad designs with point-to-point and PC boards, the Zenith YC had its share of problems as well that were heat related.
Reply With Quote
  #2  
Old 12-13-2023, 12:38 PM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by ARC Tech-109 View Post
I have to disagree with the part about tubes & PC boards.
We were RCA dealers during those years, and RCA to their credit made a very sturdy PC with excellent foil adhesion. The boards and foils handled the heat from the tubes just fine.

But the problem with those TVs was that the solder would crystallize over time, so bad tube socket connections became a thing as these racked up the thousands of hours on them. Reflowing the solder on the tube socket/PC was difficult. Most times, replacing the sockets was the best option.

I bought my first Dremel (which I still own) just for RCAs in order to pull an offending socket and grind down the oxidized pins, then resolder them back into the board which worked well.

This certainly didn't affect every RCA with tubes and boards, and I assume they were higher hour examples or those that didn't get a lot of ventilation.

John
Reply With Quote
  #3  
Old 12-17-2023, 03:45 PM
SueAnders's Avatar
SueAnders SueAnders is offline
VideoKarma Member
 
Join Date: Jan 2018
Location: NY
Posts: 108
Dunno if it's an outlier, but our '62 CTC-11 still has all it's original boards in good shape and it produces an excellent picture. Thanks to a tune up by Dave G MotoMinion, it's the pride and joy of our '56 era living room (he's got all the CTC-5s lol). In his opinion the -11 was, for a roundie, a particularly good mix of RCA's refinement up to that time and a decently durable design. We just love how it looks, and in our mid-70s it warms those childhood nostalgia cockles of our heart as well!
__________________
Happy Motoring!!

Last edited by SueAnders; 12-17-2023 at 03:57 PM.
Reply With Quote
  #4  
Old 12-18-2023, 02:16 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by SueAnders View Post
Dunno if it's an outlier, but our '62 CTC-11 still has all it's original boards in good shape and it produces an excellent picture. Thanks to a tune up by Dave G MotoMinion, it's the pride and joy of our '56 era living room (he's got all the CTC-5s lol). In his opinion the -11 was, for a roundie, a particularly good mix of RCA's refinement up to that time and a decently durable design. We just love how it looks, and in our mid-70s it warms those childhood nostalgia cockles of our heart as well!
I've got an all original metal cabinet CTC-10 that beei the hor AFC diode pack is still original and works. I don't run it much. If I did there'd be new electrolytics in it
PCBs especially in the CTC-12 and newer sets tend to have their own set of problems. Joints melt and go open fuse able board jumpers open, PCB tube sockets get hotter and fail.

All tube sets have their issues and you pick your flavor of poison.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:12 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.