![]() |
|
|
|
#1
|
|||
|
|||
|
Can I ask where you found those voltages because, as I said, the sams has voltages for the 12KP4 but not the 10BP4. Also, is that voltage for G1 0.2 volts?
|
|
#2
|
||||
|
||||
|
Quote:
http://www.earlytelevision.org/pdf/g...sams_125-7.pdf It may not be absolutely correct for your set, but the CRT voltages are close. jr |
|
#3
|
|||
|
|||
|
The Riders for the 805 chassis (also at the ETM site) has multiple versions of the TV by chassis revision and I think I found the correct specs and schematic for my chassis. It's an 805 U chassis having a cathode voltage of 340V, G1 at 110V and G2 at 25V. There is a note for the G2 voltage saying it's measured on a 50V scale (I'm assuming on a VTVM?) but that's just going to make he reading more precise on the old voltage meter correct?
|
|
#4
|
|||
|
|||
|
I must have the T or S version because this is exactly what I have. C269 is the capacitor that broke off its solder tab on the L258 coil side. Pin 10 is supposed to be 340V and I have 345V. Pin 11 is supposed to be 110V and I have 210V. Could the broken C269 capacitor solder joint account for the voltage being 100V higher on pin 11?
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|