|
The spec for 41.25 attenuation at C1 is 24 dB or greater, which means it's Ok if it's higher on the scope (closer to the top, which equals zero signal) than shown in the illustration.
At C2: a 1 dB reduction in signal from the peak is the same as a 20% [correction - 10%] reduction. So the distance shown as 1 dB in the illustration should be 20% [correction - 10%] of the max height. (the sketch looks poorly drawn - more like 10%.) [Correction - the sketch looks correct]You are getting over 30% attenuation at the markers, so this indicates the curve is too narrow.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Last edited by old_tv_nut; 12-09-2023 at 08:27 PM.
|
12-09-2023, 08:19 PM
Threaded Mode