![]() |
|
|
|
#1
|
||||
|
||||
|
Have you taken the back off to look for a chassis number?
|
|
#2
|
||||
|
||||
|
Its a T-815 chassis. The complete chassis ## is inside on the chassis, on a little
tag. The set is NOT a remote ! If it were it would have momentary contact on/off switch, not a push-pull. Maggy model ##'s usually can be used for cabinet parts ONLY. Was a well built set. Only common problems I remember were cold solder joints. If it acts up take care of them fast, they can chain react. 73 Zeno ![]() LFOD ! |
|
#3
|
|||
|
|||
|
Thanks for all the info! It still has a great picture. Good to know on the remote. I was wondering how it could have a remote but have a mechanical power switch.
I am curious about what the sensor window is doing on it unless they used this cab for both remote and non remote units? |
|
#4
|
|||
|
|||
|
The sensor on the front of the cabinet is a photoelectric eye, that has to do with the V-Matic button on the front panel next to the power switch.
It was a gimmicky thing that was done by a lot of TV manufacturers back in the 1980s to control the brightness and contrast of the TV screen according to the brigtness of the room (dimmer screen when its dark in the room, brighter screen when its lighter in the room, kind of like the auto-dimming clock displays on the old digital alarm clocks.) I hope this helps. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|