Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 10-17-2023, 08:55 PM
LukeSimon LukeSimon is offline
VideoKarma Member
 
Join Date: May 2021
Posts: 183


I adjusted the C2 adjust using the Zenith service manual’s guidelines so that the composite video signal at test point C1 is 8.1V DC when the AGC test point E is grounded and the tuner is set to an unused channel. The streaking persists.

So I used my cheap $50 handheld oscilloscope from AliExpress to view the composite signal at test point C1 for one horizontal line of the grid test pattern. It seems to show ringing distortion, but it may just be an artifact of my crappy handheld scope. I will confirm tomorrow using a real oscilloscope.

If the ringing is real, then what does it mean? Does it mean the only way to fix this is with an IF alignment?

Attached Images
File Type: jpeg IMG_7816.jpeg (124.7 KB, 77 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.