Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 10-15-2023, 10:20 PM
LukeSimon LukeSimon is offline
VideoKarma Member
 
Join Date: May 2021
Posts: 183
Quote:
Originally Posted by zeno View Post
Look on the 9-88 video module. That long white pkg gets cold joints
& the pix will flicker. When ever you see them in a Zenith solder
them. Newer sets have more.
If not that clean & tighten module connections.

73 Zeno
LFOD !

Thanks, I will give it a try. I spent some time touching up convergence and am very impressed with the vertical sharpness. I can’t believe Zenith’s CRTs had a focus this sharp. The horizontal sharpness needs work though as can be seen from the grid test pattern where the dots at the center of the grids have streaking to the right. Even if chroma gain is set to black and white, the streaking persists. I know Zenith used electrolytic capacitors to AC couple the video signal path. So I will try replacing those with polypropylene film capacitors. Any other idea what to check for this streaking?
Attached Images
File Type: jpeg IMG_7798.jpeg (133.1 KB, 26 views)
File Type: jpeg IMG_7769.jpeg (65.9 KB, 89 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.