![]() |
|
|
|
#1
|
||||
|
||||
|
Consumer level TVs of this size never had any sort of geometry circuitry on board. Any distortion would be a function of the yoke design.
I have a feeling your original capacitor is fine as is and the pincushion error you're seeing is normal (remember that flat displays have spoiled us with their perfect geometry, perfect purity, perfect convergence, etc.). Since the cap is old anyway, replace it with a good plastic one. Old scrapped plasma sustain boards are a good source of quality plastic caps in those value ranges. John EDIT: I have some caps in that size from a plasma. The brown one is 250V and the larger blue one is 315V. If you'd like one, I can stuff it in an envelope for you.
Last edited by JohnCT; 09-29-2023 at 10:29 AM. |
|
#2
|
|||
|
|||
|
I will try to ask on monday if anyone local has the right cap. i tryed looking at my scrap philips chassis but it had no right value caps. It sucks paying 7€ shipping for 0,3€ part
![]() That is really nice of you john but i wonder how long it would take to reach finland? I also think that the cap will probably not fix the pin cushion tho. How can i attach images to post like you did?... Never mind I figured it out! This forum is very helpful and friendly place Last edited by Pjaska; 09-30-2023 at 12:00 AM. |
|
#3
|
||||
|
||||
|
Quote:
I got my collection of high value/high voltage plastic capacitors from the sustain boards of plasma TVs I scrapped out - very handy in rebuilding bypass filters in old tube radios and such - once done they will last forever. If you can ask a local repair shop if they have any scrap sustain boards they're willing to give you, that's a good place to start. In any case, if you'd like either or several of those caps I have I'd be happy to put them in a padded envelope and mail them to you. I also don't have a lot of faith that a new cap will correct your pincussion error. Can you post a picture of it running? John |
|
#4
|
|||
|
|||
|
Here it is running, i think it looks worse in person. S/N looks good to me but E/W is bowed inward.
![]() ![]() It is bowed so much that i dont think it left factory this way.. I will ask monday if anyone has caps or scrap boards so i would not have to wait 3 weeks Last edited by Pjaska; 09-30-2023 at 09:49 AM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|