Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 09-19-2023, 01:02 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Think of a tube as a valve (the British term for it), because that's what it does, it valves or regulates electron flow. In a triode, the grid is the control element. Negative voltage on the grid (with respect to cathode) is the bias voltage. It
controls how much current flows from cathode to anode(plate). More negative equals less current, less negative equals more current. So you want the bias point to be fixed midway between minimum and maximum plate current swings, i.e., the idling current. When a small signal is applied to the grid, it "valves" a corresponding LARGE flow of plate current. The bias point being fixed midway gives the best linearity to the amplified signal (which appears across the plate load, which can be a resistor, an output transformer, old-school headphones, etc.).
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:34 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.