Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-07-2023, 06:08 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
Quote:
Originally Posted by old_tv_nut View Post
I don't have the SAMS. Is that where the 8.2 mHy is stated?

Anyway, I assumed 2 Mhz and calculated 9.3 mHy. Using that and using the tube characteristics to calculate the cathode impedances, I calulate that the 39 ohm and the cathode resistances result in an equivalent resistance of 128 ohms in parallel with the sharpness control 100 ohms (total 56 ohms), resulting in a net damping factor of 1.04 (assuming a 9.3 mHY coil). For a 8.2 mHy coil, the damping factor is 0.98, so still essentially 1.0

For either inductance, the peak current gain at the resonant frequency is 0.4426 at resonance, compared to 0.1822 at DC, for a gain increase of 2.43 times or 7.7 dB at resonance compared to DC.
Yes, I looked up the replacement specs in the sams, and it said that L15 was 8.2, (rf choke) along with a list of subs.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:19 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.