Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-05-2023, 04:31 PM
Phil Phil is offline
VideoKarma Member
 
Join Date: Aug 2016
Posts: 147
I would check the resistors around the delay line. Perhaps a series resistor at the input (or not) and usually a resistor to ground at the output. If these aren't presenting the delay line with the proper impedance the delay will not be correct. I had that problem in an old RCA.
Reply With Quote
  #2  
Old 09-05-2023, 06:05 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
Quote:
Originally Posted by Phil View Post
I would check the resistors around the delay line. Perhaps a series resistor at the input (or not) and usually a resistor to ground at the output. If these aren't presenting the delay line with the proper impedance the delay will not be correct. I had that problem in an old RCA.
Ditto. Coils around the delay line also.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #3  
Old 09-05-2023, 08:02 PM
LukeSimon LukeSimon is offline
VideoKarma Member
 
Join Date: May 2021
Posts: 183
Quote:
Originally Posted by old_tv_nut View Post
Ditto. Coils around the delay line also.
Wouldn’t that cause smearing in the black and white picture, and/or the color and luma signal not being aligned. I don’t see smearing in the BW picture, and the color signal is not shifted to the right of the BW signal. It seems aligned with luma but is heavily smearing.

I think another clue is that the color burst has smearing, and the color burst doesn’t pass through the chroma bandpass. The smearing of color burst is causing the tint control to have a small range, but after aligning the chroma AFC, the color oscillator is still able to lock instantly and without issue.

These clues seem to suggest it is not delay line and not chroma bandpass. It is RF or IF that is not peaking enough at 3.58mhz.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:46 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.