Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 09-05-2023, 09:29 AM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
I repaired several thousand of the 17X series over the years with the "TOB" - tuner-on-board as Thomson called the design.

The problem wasn't the tuner design as much as the implementation. If RCA/Thomson/TCE had added ground *wires* instead of relying strictly on the tuner wrap to provide ground structure, the tuner issues wouldn't exist. It was the constant expansion and contraction of the large tuner wrap that caused the brittle solder to crack.

A lot of companies had similar issues with the lead free solder even in can tuners. I did tons of Sony tuners and tuner/IF blocks for basically the same issue. The only difference is that the bad solder didn't interrupt the ground structure for the rest of the TV so it didn't corrupt the eeproms in Sony TVs.

Back when they first started appearing in the shop (in warranty), I would add ground wires and that fixed them permanently. Later, when I was doing 10 of these chassis a day, it was far too time consuming. What I did on those later jobs was to scratch the foil resist back around the tuner ground edges to expand the solderable lands. With some liquid flux, lead solder, and a hot tip, I would lay in a good bead of solder. Wash down with a can of Flux Off and I wouldn't see those come back for at 5 years minimum and most of them never.

RCA provided free of charge to ASCs a revision "kit" of some paste flux and a small quantity of eutectic solder as a "revision". This was "required", so periodically, I'd order a bunch of these kits to think we were following the "goldenrod" service bulletin. The solder was useless for anything so when the envelope from Thomson showed up with that kit I'd just toss them, but Thomson thought by ordering them we were using them...

Hardwiring though is the only permanent fix.

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:12 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.