Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 07-27-2023, 02:42 PM
mhamilton mhamilton is offline
VideoKarma Member
 
Join Date: Apr 2016
Location: Raleigh, NC
Posts: 10
Got the new NTE 502 selenium rectifier last night, TV is back to working! B+ is right on spec, current is also where it should be.

Find it very odd that the old rectifier went bad after just sitting in climate controlled storage for 20 years, but who knows. Maybe it was about to fail when it got put into storage.

Only small issue is the 502 is about 2.5mm larger in diameter than the original MF12, so it doesn't fit with the rubber boot into the flyback. I'll probably insulate it with tape and heat shrink so it fits in, leave the boot off.

Many thanks for the help!



Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:40 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.