Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Gear

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #23  
Old 07-27-2023, 05:43 AM
vintage.digi vintage.digi is offline
VideoKarma Member
 
Join Date: Dec 2019
Posts: 43
Have any of you guys ever used a "leaky" coax as an antenna? I was researching antenna options for UHF broadcasting which brought me to this, which seems like it could perhaps be a great option for my interconnected metal buildings. I haven't tested the UHF transmission of combined channels yet, but I did find this diagram in the manual for my UHF modulator which shows the output connected to an amplifier and antenna: fig 2. http://files.d-tools.com/Visualizati...-1_Manual1.pdf

It actually shows the modulator output running to a splitter which then goes to both wired coax and wireless, but I have no need to do that in my situation. (The UHF broadcasts will be VHS simulcasts)

My mini modulators don't have power supplies built-in, but I think I fixed a lot of the interference by replacing my old MIPS-12 power supply with a new MIPS-12D, and also additionally skipping channel 2 as this channel had more issues on older sets than any others. It's still not 100% perfect, but I have to really be looking to see the issues in most cases, and I feel like they're likely in line with the sorts of issues that were present in TV signals when I was younger.

As for the question, "How are you verifying the actual carrier frequency of the modulators?" Currently I'm not. I'm just learning all of this. How would I verify this? Also, if it was out of calibration, is there anything I could do about it? I don't recall seeing any adjustment pots inside but I didn't look for them when I changed the jumpers.

So far, I've managed to get things pretty functional by just eyeballing. I would like to learn how to set this stuff up properly over time, as I'm able to acquire the needed testing equipment. Right now, I don't have much in the way of testing equipment asides from a multimeter, CRT tester, and a pattern generator.

I also will need to learn how to set an RF amp. Currently I'm setting it to the lowest amplification level that doesn't cause static, and I'm setting the slope to nothing in particular.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:09 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.