Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-15-2023, 04:47 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by zeno View Post
Keep in m ind for arcing EVERYTHING is at 25 KV above ground.
Tube, socket, filament winding, HV lead & any small parts at the socket.
So they can arc anywheres.
Yeah which is pretty annoying lol. I also noticed that the old HV rect. tube socket has loose pins/posts on it which makes me wonder about connection issues. Anyways I am replacing that too soon to rule it out.

Photos of the new old stock flyback installed! It looks much beefier and more insulated than the original. Also noticed that it uses what looks like asbestos fabric to insulate the three wire winding that leaves to go up to the tube socket instead of the rubber the old one used.

I extended the old short wires with new wire so I had plenty of slack to work with. I finished up by adding extra insulation via heat shrink tubing. Installed a 1N5408 silicon diode rated at 3 amps and 1000Volts just because I wanted to for peace of mind.

How do you test a Focus divider btw? I have not tested it yet.

https://imgur.com/a/4rVeii9
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.