Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-08-2023, 06:44 PM
Console User Console User is offline
VideoKarma Member
 
Join Date: Aug 2013
Posts: 245
Pictures of 1997 Console TV

IMG_0647.jpeg

IMG_0646.jpeg


Anyone know for sure what the issue is by looking at the photos?

Last edited by Console User; 07-09-2023 at 08:55 AM. Reason: Added a description of issue
Reply With Quote
  #2  
Old 07-10-2023, 10:32 AM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by Console User View Post


Anyone know for sure what the issue is by looking at the photos?
Yes, your horiz osc adjustment is off. This is done through the service menu and means the data in the eeprom is most likely corrupt (I have seen this literally a thousand times or more).

Go back to post #3 above and see how to address the cause of the eeprom corruption, otherwise any adjustments you make will be in vain. Corruption of the eeprom can cause any symtom up to a dead TV. If the TV is dead, you will need to remove the eeprom and reprogram it on a programmer or replace the eeprom if you can find one.

I no longer recall the exact way of getting to the osc adjustment but I seem to think that you hold down the menu, hit the power (release) and vol + (release vol + and power and you should see two sets of numbers on the screen. You will raise either the vol or channel until one set reads 76, then you can advance to the horiz osc and adjust that. Maybe someone else remembers the exact position and sequence to get into the serv menu. If not, I have that info somewhere.

But to be clear, these chassis will corrupt the eeprom if the ground structure around the tuner isn't repaired or bypassed and both heatsink ground tabs aren't resoldered. This must be done before *any* work on these chassis takes place.

John
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:01 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.