![]() |
|
|
|
#1
|
|||
|
|||
|
I don't know this model but, if it is similar to most TV using all-in-one video processor, is also good to check if it have bad soldering on H feedback capacitors, the small ceramic ones in the HOT collector (if it uses this), at least to be sure.
__________________
So many projects, so little time... |
|
#2
|
||||
|
||||
|
The chassis that put one son through 6 yrs of collage, TNX Thompson !!
He would tag along & do them along with other common problem sets. Anyhows if this set has a PIN circuit one of the HV caps would open, maybe this one is just starting. JohnCT may remember which one. IIRC RCA supplied a different style. 73 Zeno ![]() LFOD ! |
|
#3
|
||||
|
||||
|
Quote:
I didn't think pin because OP said the pic was moving left to right, so I was thinking either horiz phase or horizontal centering. Any bowing (which he might have but didn't mention) would indicate pincussion caps which were indeed known to fail. Pics certainly would be a big help. John |
|
#4
|
|||
|
|||
|
|
|
#5
|
||||
|
||||
|
In any case first all parameters should be WRITTEN down then the solder job.
I would not recommend just anyone do it unless expirienced with SMD. & have a nice iron. Under the shield things are VERY close, its a miracle I only splashed one out of hundreds done ! 73 Zeno
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
You make a good point - the best option for amateurs is probably to bypass the tuner shielding entirely and ground the T-Chip and micro cage areas directly to the cold side of the power supply because, as you say, it's tight in that tuner. John |
|
#7
|
|||
|
|||
|
Think I got pictures taken of the Console Set with the issue . They are in my Album . I do not know how to get the pictures onto the thread.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|