Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #27  
Old 06-21-2023, 01:47 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by Electronic M View Post
Looking at the schematic is the best way. Some sets were hot chassis and had a transformer. One of Zenith's first FM stereo tube table radios had a heater transformer but directly rectified AC and tied one leg of the AC to chassis. Some TVs had a transformer for B+, but series heaters tied directly to incoming AC with one lead going to the chassis...

If B+ and heater are derived from a power transformer you've got a pure transformer set, otherwise you have a hot chassis set with or without a power transformer.

Also some transformer chassis sets can develop shorts that make the chassis hot...That's something to beware of too...I had a TV repair isolation transformer primary to secondary short on me....I didn't realize till I got shocked...the fun way to find out!
After looking at the schematic and the tubes on the schematic. It looks like the B+ voltage comes from the transformer but the heater voltage does not. I guess that answers my question lol. Luckily I have not been shocked by anything yet, well other than a can cap early on.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:00 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.