Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 05-26-2023, 01:51 PM
LukeSimon LukeSimon is offline
VideoKarma Member
 
Join Date: May 2021
Posts: 183
Quote:
Originally Posted by Yamamaya42 View Post
The multi lytics in the set are as such.

C1-A&B (80uf@450) are impossible to reach cause of no room, (filters)
C1-C is 20uf @ 350 and may be able to isolate and relocate as it's for the grid of audio output.
C2A 80uf @ 450 filter
C2B 50uf @ 450 filter on vert output
C2C 30uf @ 450 filter
C3A 20uf @ 450 filter bottom of voltage divider
C3B 20uf @ 450 filter video amp 1
C3C 20uf @ 450 audio out xformer

Just can't do anything to C1 w/o destroying it.
For my Magnavox T931, I used an oscope to measure the ripple voltage on each lytic that is used as a decoupling capacitor. They all measured good. I also did in-circuit ESR and capacitance tests and all measured good except those 2 on the convergence PCB. I bet after reforming, most are still within specification.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.