Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-18-2023, 01:48 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
D and E-line flat chassis Zenith, vertical chassis CC2, 1st generation Zenith System 3 with the VRT power supply and 9-153 HV/sweep module. Yes, they had issues, but they were usually easy to resolve and a straightforward circuit.

PC-chassis GE. They saved the best for last and that chassis was used in 19" and 25" sets. Usually, a few capacitors would cure any problems that they had.

C1 and C2 chassis Magnavox sets. The T991, T995, and T815 were also decent, as long as you kept spare safety capacitors on hand and resoldered all of the module contacts.

Late '70s Quasar, after the Matsushita takeover. The ones from the '80s were not as good.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.