![]() |
|
|
|
#1
|
|||
|
|||
|
Actually it runs the other way. SP tape can play in a standard betacam deck and will show the full 330 horizontal lines, the difference is with the recording electronics. I have recorded Betacam SP on oxide tape in the past with the only penalty of more dropouts.
When SP was conceived it was a slight improvement in s/n ratio and the luma bandwith was pushed up slightly thanks to the metal tape, the biggest change was with the L tape that could handle 90 mins of recording. |
|
#2
|
|||
|
|||
|
Quote:
So, SP machines allow to manually choose SP or regular mode no matter what the tape is? I thought there was a detection hole or something that would prevent doing this. So between regular Betacam and SP the major difference is that the basic machine cannot record on metal tape? Playback wise they are compatible backwards and forward? M and M-II are not compatible at all? M-II cannot play M tapes? |
|
#3
|
|||
|
|||
|
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|