Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 05-03-2023, 08:06 AM
ARC Tech-109 ARC Tech-109 is offline
Retired Batwings Tech
 
Join Date: Jun 2020
Location: Planet Earth
Posts: 612
The paper/oil caps will pop without warning or provocation, electrolytics dry out and are known to go leaky both physically and electrically. Disk ceramics are quite stable and I've had numerous film caps go bad from being exposed to the high temps and voltages in vintage tube gear. Another to consider are the carbon comp resistors that get baked from radiated heat, nothing like a 6L6 or pair of KT88's to cook them. 50+ years of absorbing moisture cold only to be baked dry again when the heat is on, I'm also an audio guy and have over 40-plus years of experience with tubes so I know what you're dealing with. Case in point is my Magnavox T-940 AstroSonic. The IF gain would drift down as the set warmed up due to the resistors drifting up thus dropping the plate voltage. As an experiment I dynamically tested each resistor in circuit, Simpson 260 on the leads while heating the suspected resistor with a soldering iron at 45 volts (220F tip) and watched it drift up beyond the 10% tolerance rating. The set spent its first 14 years entertaining us kids, been in the family since new and it's going to get all new resistors in the near future.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.