Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-02-2023, 08:25 AM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by Alex KL-1 View Post
Last year I acquired a delta gun TV, and at testing, I'm desperate due to lack of any image. And a faint image appeared with bias pots maxed out. I think the CRT was dead. But then I noted that the G2 bias caps are paper-in-oil, and I decided then to change it for polypropilene caps. Voilą! Image back, with great brightness, at middle of adjusment!
The bias normally have relatively high DC resistance, so bad caps can upset correct adjustment.
If you not checked yet, is good to check if cathode, G1 or G2 have messed DC voltages due to leaky caps or drifted resistors. Also serves for various other faults you have found or will encounter. Unfortunately, older sets are not so reliable like 80's+ sets...
I noticed that there were a relatively large number of paper oil caps in this tv as they are many of these older sets from the early 1970s and earlies. I definitely am going to end up eventually recapping all the electrolytics, any remaining wax papers I may have overlooked and the paper oil ones too.

Even if the ESR has not went bad yet, they can still be leaky as I have learned is often the case when at operating voltages.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.