Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #17  
Old 04-28-2023, 02:11 PM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,534
Don’t know if this will help Tim but there might be an issue with the CRT socket at pin 2. When I was troubleshooting the video loss I noticed the full screen raster I had collapsed when I moved the tube in such a way that the wire going to pin 2 got flexed at an angle approaching 90 degrees to the socket. That’s why there’s heat shrink on it to stiffen it up. I’m just throwing that out there in case there’s some issue with that connection when the CRT gets warm. I can’t remember if the vertical collapsed to a horizontal line or the screen went dark when this happened. In any case, there may, emphasis on may, be an issue with the CRT socket at pin 2 connection.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.