Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 04-27-2023, 06:31 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by Dubis7 View Post
I did notice it starting to rub a little when it reaches that point. You can actually hear physical scratching. What's the solution? Just bend the plates a little so they don't touch?

Oscillator coil would be L2 in this case, right? That's a fixed coil on mine - looks like it might just be the nature of this beast.
You can bend plates to stop rubbing. Be careful that you're bending the right one(s) or you'll be making new rubbing...

Usually there are 2 screws on the side of the tuning cap that are adjustable open air mica insulated trimmer caps near terminals on the tuning cap. If there's no FM the osc trimmer will be the adjustment screw on the side of the smaller set of fixed plates on the tuning cap. The service manual often calls out a procedure for setting both the osc and tuning sections of the variable cap (and RF section if if we're an AA6 and there's an RF amp stage).
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:47 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.