![]() |
|
|
|
#1
|
||||
|
||||
|
Hey Chris the ballast you made is that design for this ts-4h ?
|
|
#2
|
|||
|
|||
|
Yes...If you look back in the thread, I made it as per a discussion with Bob A. It's the same construction as the other ballast found in these sets but required a change in pin to work correctly. I'm pretty confident it was built correctly as I had many exchanges with Bob and other members in the thread.
Thanks Chris |
![]() |
| Thread Tools | |
| Display Modes | |
|
|