Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2023, 04:01 PM
redk9258 redk9258 is offline
VideoKarma Member
 
Join Date: May 2017
Location: Troy, IL
Posts: 164
I'll bet it's a cap that's bad. Maybe leaving it powered on reformed it.
Reply With Quote
  #2  
Old 03-13-2023, 05:38 PM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Quote:
Originally Posted by redk9258 View Post
I'll bet it's a cap that's bad. Maybe leaving it powered on reformed it.
That's what I was thinking, but I wasn't sure where the cap was, or what board to begin to look at for that cap, because there are about a dozen circuit boards inside of this VCR and some of them aren't the easiest to get to, and the Sam's wasn't much help in regards to telling me which board controlled what, and they didn't really have a troubleshooting section in the manual to trace down certain issues with.
Reply With Quote
  #3  
Old 04-05-2023, 10:27 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Well I just started working on the PV-1650 VCR the other day and I replaced all of the Belts and had the play idler rebuilt by Gary over at the Voice of Music Enthusiasts and the VCR is still having issues with not wanting to play a tape after loading the tape up to the heads.

I have a copy of the Factory Service Manual from Panasonic that I got from Sam's which they sent me that because they didn't have their own service manual for the PV-1650 uploaded into their server database and that manual was very helpful (a lot more helpful than the Sam's Photofact manual for the PV-1750 was).

I figured out that there is a board that specifically drives/controls the loading and playback mechanism of the VCR (more or less the logic board for the VCR that controls whether the VCR mechanism plays, rewinds, fast-forwards, pauses, etc.) and so I removed that board from the VCR and looked it over and sure enough basically every single capacitor on that board was bad (either dead or had an ESR measurement of 2 Ohms or higher) and was also leaking electrolyte.

So I'm working on recapping that logic board so I can see if that will fix the VCR so it will play again.

Hopefully I'll have an update soon that will be a positive update where the VCR is working again (or at least mostly working again.)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:25 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.