Back to the VT-71H

[timmy]

Originally Posted by Chris K

Wow thank you so much! I'll probably make both the resistor and capacitor version and see how they work.

BTW, I didn't check video signal with the scope but I had continuity between the 6AU6 plate and the CRT so there's no mechanical issue. The coils are good and I changed the capacitor just for good measure. Still no image getting through...just sound and the bright and full screen raster.

Did you check the position of the contrast control ? I didn’t give the wattage for the others all the resistors listed that have the = mean that’s the ohms that I used for that one. The 2-150 ohm 2watt. 22-or 25 ohm 20 watt 37or 50 ohm 10 watt all these are what is in my sets. How about the position of the horizontal hold pot?