Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 02-10-2023, 01:00 PM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by TrllVl90 View Post

As for the red smearing it's way better now that I've replaced the busted capacitor, but it's there if I crank the color pot all the way up, I'll have to find a setup how-to and follow along.
Even with bad setup, a strong tube won't flare like that except for the auto-AKB twin focus models like Zenith made when the G2 was set too low.

Remember that the CRT heater voltage is sourced from the fly, so if your HV is low, your filament voltage will be low in a proportional amount. Even an otherwise strong tube will flare with low filament voltage.

With a TRMS meter, measure the filament voltage (AC) at the CRT socket to see if you're getting 6.3V. Don't use an analog meter and don't use a meter that isn't a true RMS type because your AC is at the horizontal rate, not 60hz.

If the voltage is low, your HV is also low, and that could have to do with the retrace capacitor you changed (as well as other things such as B+)

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.