Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-09-2023, 08:08 PM
AppliedTech AppliedTech is offline
VideoKarma Member
 
Join Date: Feb 2023
Posts: 4
Here it is, the picture is stable and it stayed that way for a couple of hours last night using a digital->analog converter, and then an old junker laptop to feed it shows through an HDMI->Composite adapter.


I need to get the mirror back on it and spend some time adjusting it, lesson learned on the coil adjustment locations. Looking back at the SAM's manual with new eyes I see it did clearly identify the location and adjustment methods, but I jumped to the conclusion that they would have flathead screwcaps like my radios. Here's an example picture of what an adjustment for a nylon hex adjustment tool looks like located inside of the coil looks like if another beginner stumbles on it in the future:
Attached Images
File Type: jpg IMG_20230208_194128.jpg (76.7 KB, 57 views)
File Type: jpg IMG_20230206_190722.jpg (68.7 KB, 54 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:59 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.