![]() |
|
|
|
#1
|
|||
|
|||
|
This may not be helpful at all, but I have had the same problem in U-matic machines, obviously not the same thing as VHS, but anyway the problem was caused by a failed or mis-adjusted microswitch which tells the logic the tape is threaded and ready to play. If it doesn't get this signal it will unload the tape. You might check to see if there is such a switch in your machine.
|
|
#2
|
|||
|
|||
|
Quote:
|
|
#3
|
|||
|
|||
|
Well I got the PV-1750 to play tapes finally, it was a combination of a bad play idler tire and a belt that was too big on the underside.
But now that I got it playing tapes again, I've noticed that it plays tapes too slow, and I'm not sure why. When its playing the audio sounds like a 45 RPM record being played at 16 RPMs, and the picture has large scanline bars going across the screen that look like a movie having tracking issues but its not a tracking issue because its not correctable with the tracking controls. I can make a video and post it to youtube so you can see what I'm talking about if that's necessary. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|