![]() |
|
#29
|
||||
|
||||
|
PHONO pre amp is source trouble. ( X1 & X6 )
Try C3 & C8. Check the 25V line. There should be a lytic cap there, change it. Without signal check the voltages on X1 & X6 be sure they are very close. If one is leaky it could effect the "good" channel & make both bad. Used to happen to cheapo stereos in the 70's. Be nice if you could post schematic of power supply area also. Zeno
|
| Thread Tools | |
| Display Modes | |
|
|