Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-24-2023, 11:41 PM
bhegges bhegges is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 140
To pick this thread back up I am looking at early color Zenith sets and they also use VDRs and thermistors. The degaussing circuit uses a pair and some sets have a VDR in the yoke.

To start somewhere I am interested to understand the the function of the VDR in the AGC Keying circuit and how to test.
  • 29JC20 chassis AGC Keying control grid voltage used a 3meg fringe lock pot feeding from the low voltage source
  • 26KC20 through 25MC36 chassis used VDR #63-4906 in place of a pot
  • 24MC32 and several later chassis used VDR #63-5494, while the part number changed the circuit looks the same

Looking at the snippet from the 25MC30 chassis the 105v source should be stable making it easy to measure the voltage drop and current through the VDR (assuming I have a good VDR). This info could then be used to set up a test circuit for trying substitutions. I will assume with voltage applied it comes in somewhere around the same value as the middle of the pot used in the earlier circuit. How much can this low voltage supply vary, enough to warrant using a VDR I guess.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.