![]() |
|
#4
|
||||
|
||||
|
OSD can be generated in the micro or jungle IC. The data was stored in an
E-prom usually. Zenith was the only teletext builder I know of here in the colonies. It was in digitally processed NTSC sets ( ITT chip set ). Cant help there as all the digital stuff was on a module w/ plug in IC's so that would be swapped out. Looking for cold joints & unseated connectors a good start. Especially watch the plug / sockets of sub boards & input jack packs. And always watch for bad hook up cables ! Also look up the data sheets on the jungle IC that can give you a good idea of where the I/O's are & more Hope you get her going again. Let us know how you do. Cheers Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|