![]() |
|
#2
|
||||
|
||||
|
Looking at the model ## I assume this is not a US sold set. In the
US it is probably a 35## model, actual screen size ( 35"). Anyways most problems like this are bad electrolytic caps. Usually small surface mounts in the PIP or video in general. This type of problem can make a tech run like hell ! When new you could buy main boards & sub assemblies until they were gone. After that if in warranty the set was junked & replaced. So sorry I cant give a simple solution but maybe others can help. good luck 73 Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|