Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #17  
Old 01-01-2023, 05:23 PM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
I did have an unusual problem with one of my vt71 and after putting the new diode in it turned out that someone didled with the alignment screws at the head of the chassis IIRC the 4h or 4j has those adjustments but the ts18 don’t if the diode don’t work and everything else is good to go then check the schematic for channel 3 slug on the chassis it didn’t take much to get it working. Just another thought on these sets. Those germanium diodes should check under 3 and indicated good.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:17 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.