![]() |
|
#2
|
||||
|
||||
|
Honestly this sounds like a known issue with some of these Motos where the video detector diode fails...When that happens you get no video and weak sound.
If you have a line isolation transformer to power the set with, you could try injecting video at the output of the detector. If you have a pattern generator that can output on the old IF frequencies (like a B&K 1077 Analyst) you can try injecting IF at the ant terminals or 1st IF and see if it gets through.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|