Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-14-2022, 03:32 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
1) set to service, the SW on the board.
2) adj the APC control o bars just slowly go by.
3) SW to normal, adj ACC control per manual.
If the IC's are in sockets get rid of the sockets but IIRC
the sockets were gone by G-line sets.

Watch out for dirty Chromatic switch also.
Or be lazy & just change the 9-86 ( -01 ? ). Still thousands of them around.
Many NOS.

73 Zeno
Reply With Quote
  #2  
Old 12-14-2022, 06:32 PM
Mangie Mangie is offline
VideoKarma Member
 
Join Date: Dec 2022
Posts: 14
Quote:
Originally Posted by zeno View Post
1) set to service, the SW on the board.
2) adj the APC control o bars just slowly go by.
3) SW to normal, adj ACC control per manual.
If the IC's are in sockets get rid of the sockets but IIRC
the sockets were gone by G-line sets.

Watch out for dirty Chromatic switch also.
Or be lazy & just change the 9-86 ( -01 ? ). Still thousands of them around.
Many NOS.

73 Zeno
Thanks for the alignment tips!

oh! Didnt think of the Chromatic switch. I shall give that a good cleaning as well. Also looks like the IC's are not in sockets and soldered right in.

Took a quick look on the ebay and I didnt see anything Chromatic switch or the board. Is there a good place to find parts for these old Zenith's
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.