Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #25  
Old 11-13-2022, 07:00 PM
pdr-fml pdr-fml is offline
VideoKarma Member
 
Join Date: Oct 2016
Posts: 48
No worky

Quote:
Originally Posted by pdr-fml View Post
Today I will put chassis back in and check for raster on the old 19AP4. I am leaving tuner module out for right now because I have more work to do due to a cracked gear in mechanism (same problem Phil had on his RA-113). Parts replaced thus far shown in pic below not showing a several tubes replaced also. I will update later.
Attachment 205047
Hooked everything up with the exception of tuner and speaker and applied power and it appears I am not getting high voltage. I couldn't do screwdriver test on Horiz out tube since it is insulated on top so I touched connector that joins high voltage lead from chassis to CRT high voltage lead and don't get any spark at all. Nothing on CRT screen either. I can hear the vertical working and can hear it change with control adjustment. Fly back was checked out with ohm meter before hopefully that is still ok. Going to start investigating and will ask for help if I am stumped. Too bad I don't have a test CRT tube.

Last edited by pdr-fml; 11-13-2022 at 10:06 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:27 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.